Menu

Department of Automobile Engineering

Faculty Achievements


Dr. Chinmay K. Desai has been awarded Ph.D. degree in Mechanical, from SVNIT, Surat in September '12.

Dr. Chinmay K. Desai has published paper titled "Prediction of Depth of cut for single pass Laser micro-milling process using Semi-analytical, ANN, and GP approaches." International Journal of Advanced Manufacturing Technology, (IJAMT), Springer, U.K., Volume 1, Volume 57 / 2011.

Dr. Chinmay K. Desai has published paper titled "Experimental determination of laser beam absorptivity of thermoplastics". International Journal of Emerging Technologies and Applications in Engineering Technology and Sciences. (IJ-ETA-ETS) (ISSN: 0974-3588), Vol. 4, Issue 2, 2011.

Dr. Chinmay K. Desai has published and presented paper titled "Prediction of Depth of cut for single pass Laser micro-milling process using Semi-analytical, ANN, and GP approaches." International Journal of Advanced Manufacturing Technology, (IJAMT), Springer, U.K., Volume 1, Volume 57 / 2011.

Dr. Chinmay K. Desai has published and presented paper titled "To study the effect of fiber content on power requirement for machining natural fiber reinforced plastic using analysis of variance (ANOVA)." International and INCCOM-6 Conference on "Future Trends in Composite Materials-2007" (INCCOM-IV), December 12-14, 2007, IIT Kanpur, India.

Dr. Chinmay K. Desai is Reviewer for the International Journal of Advance Manufacturing Technology, (Springer), International Journal of Material Processing technology (Elsevier) and International Journal of Precision Engineering and Manufacturing (Springer).

Mr. Paresh Chhotanihas been awarded Gold Medal for securing First position in M. Tech. - CAD/CAM from SVNIT, Surat in Aug ".

Mr. Paresh Chandrakant Chhotani has published and presented paper titled " Effect of elliptical shaft geometry on non- dimensional pressure and load in hydrodynamic journal bearing." International conference on advances in tribology and engineering systems, springer India 2014.

Mrs. Palak Desai has presented paper titled "Design Of Mechanical Device-Centrifugal Pump" at National conference on "Emerging Trends In Mechanical Engineering" on 4th-5th June 2007, at SVNIT Surat.

Mrs. Palak Desai has presented paper titled "Improved Yttria Dispersed Copper-base Composites by Nanosynthesis Route" at International Conference & Exhibition on Powder Metallurgy in Industries held at Jaipur on 27th -29th Jan 2010.

Mr. Devendra A. Patel has published and presented paper titled "Stress Analysis Of Axial Flow Impulse Turbine", 1st National Conference on Thermal, Fluid and Manufacturing Science, Surat, January, 20-21, 2012.

Mr. Devendra A. Patel has presented paper titled "Paper titled "Stress And Displacement Analysis Of Turbine With Stainless Steel Rotor Blade Material" International Journal of Engineering and Social Science, November-2011.

Mr. Karan Joshi has published and presented paper titled "Assessment of Microstructure Degradation For Gasifier Shell Using In-Situ Metallography Test" International Journal of Emerging Technologies and Application in Engineering, Technology and Science. Page no: 065-069, July '12 -December '12, Volume 5: Issue 2.

Mr. Karan Joshi has published and presented paper titled "Assessment Of Thermal Fat0igue Failure For Bs 3059 Boiler Tube Using In-Situ Metallography Test" International Journal of Emerging Technologies and Application in Engineering, Technology and Science. ISSN: 0974-3588, July '12 -December '12, Volume 5: Issue 2.

Mr. Hiren Shah has been awarded Gold Medal for securing First position in M.E. Mechanical (Thermal Engineering) from GTU, Gandhinagar in Jan ".

Mr. Hiren Shah has published paper entitled "Thermodynamic Analysis of Cascade Refrigeration System using R508B-R404A for Vaccine Manufacturing Application" in GIT-Journal of Engineering and Technology, 2012.

Mr. Hiren Shah has published and presented paper entitled "Comparative Assessment of a Cascade Refrigeration System for Different Refrigerant Pair" in 2nd International Conference on Current Trends in Technology, 2011.

Mr. Hiren Shah has published and presented paper titled "Thermodynamic Analysis of Cascade Refrigeration System using R508B-R404A for Vaccine Manufacturing Application", in Fifth Volume of GIT-Journal of Engineering and Technology, Gandhinagar, 2012. ISSN 2249-6157

Mr. Hiren Shah has published and presented paper titled "Comparative Assessment of a Cascade Refrigeration System for Different Refrigerant Pair", in 2nd International Conference on Current Trends in Technology, Nirma University (NUiCONE), Ahmedabad 08-10 December, 2011. ISBN 978-81-92304908

Mr. Hiren Shah delivered an expert lecture on "An Overview of Micro Channel Heat Exchanger" at Shroff S R Rotary Institute of Chemical Technology, Vataria, Bharuch on 19th September, 2015.

Mr. Hiren Shah have published a research paper with Mr. Piyush Patel and Mr. Krunal Gaywala titled "CFD Analysis of Nano Fluid through Channel", in an International Journal of Fluids Engineering; Vol 7, 2015, pp 41-50. ISSN 0974-3138.

Mr. Sunny Naileshbhai Desai has published paper titled "Shrinkage porosity elimination and surface roughness analysis in the investment casting of the hook used in pasta making machine" International conference on advance trends in engineering and technology, 19-20 Dec, 2013. ISBN 978-81-925882-5-4.

Mr. Vikesh Patel has published paper titled "Shrinkage porosity elimination and surface roughness analysis in the investment casting of the hook used in pasta making machine" International conference on advance trends in engineering and technology, 19-20 Dec, 2013. ISBN 978-81-925882-5-4.

Mr. Ramakant Panchal has published paper titled "Shrinkage porosity elimination and surface roughness analysis in the investment casting of the hook used in pasta making machine" International conference on advance trends in engineering and technology, 19-20 Dec, 2013. ISBN 978-81-925882-5-4.

Mr. Pratik Patel has presented paper titled Paper titled "Kinematics of V-groove in Flashing Operation of Precision Steel Ball Manufacturing Process " got selected in NCAET, March-2012.

Mr. Darshan A. Kapadia has presented paper titled "A numerical modelling of an electric arc and computation of vapour flow in transferred arc system" 5th International Conference on Advances in Mechanical Engineering held by Department of Mechanical Engineering, Sardar Vallabhbhai National Institute of Technology, Surat during 6th - 8th June, 2011.

Mr. Vinod Patel has presented paper titled "Effect of cooling on performance of Electronic Heat Sinks".

Mr. Piyush Thakorbhai Patel has published and presented paper titled "Characterization of segmented mirrors with ? motion mechanisms", for JME (Journal of Mechanical Engineering) Vol.10, 2013 with ISSN No. 2249-0531.

Mr. Gauravkumar Gadhesaria has published and presented paper titled "Experimental investigation of thermal performance of a double flow solar air heater having aluminium cans" National conference on emerging vistas technology, 2013.

Mr. Krunal B. Gaywala has published a book titled " Elements of mechanical engineering" New popular publication.

Mr. Krunal B. Gaywalai has published and presented paper titled "Performance prediction models of straight bladed vertical axis darrieous type water turbine" International journal of scientific computing, 2013. Mr. Keyur Chandubhai Patel has published and presented paper titled "Secondary Refrigerant System for Water Ice Candy Manufacturing Process with Calcium Chloride Brine" in GIT-Journal of Engineering and Technology, National Level Research Journal- ISSN 2249 - 6157.

Mr. Keyur Chandubhai Patel has published and presented paper titled "Thermal Optimization of an Ice Cream Hardening Process" at 3rd Nirma University International Conference on Engineering, NUiCONE-2012. Mr. Krishna Rajeshkumar Patel has published and presented paper titled "Effect of Mechanical Vibration and Grain Refiner & Modifier on Specific Wear Rate and Hardness of Hypereutectic Aluminum Silicon Alloy" Indian Foundry Journal, 2013.

Mr. Darshan A. Kapadia has been awarded M.Tech degree in "Mechanical Engineering with specialization in Automobile Engineering", from Veermata Jijabai Technological Institute - Mumbai (Autonomous Institute affiliated to University of Mumbai) in 2011.

Mr. Darshan A. Kapadia has published and presented research paper named "A numerical modelling of an electric arc and computation of vapour flow in transferred arc system" at 5th International Conference on Advances in Mechanical Engineering held by Department of Mechanical Engineering, Sardar Vallabhbhai National Institute of Technology, Surat", during 6th to 8th June, 2011.

Mr. Jainish Topiwala was awarded with Certificate of Merit and 5000/- INR Gift Money for poster presentation titled "Study of weld defect behavior under the operational conditions of heat transfer element: First phase", in 30th National Symposium on Plasma Science & Technology, at SINP, Kolkata; 1st-4th December, 2015.